Welcome To Didatec
Choose your product :

Reducing valves:

-the line allows to test two different reducing valves

-each reducing valve has a stop valve before and after and a Y shaped filter

-two different technologies are used (pilot operated pressure reducing valve and direct acting reducing valve)

-a third line with a valve allows to bypass reducing valves

Control valves :

-the line allows to test two different control valves

-valves control the steam flow, depending from the water temperature at the outlet of the exchanger

- each control valve has a stop valve before and after and a Y shaped filter

-there is an electric actuator and a mechanical actuator

-a third line with a valve allows to bypass control valves

Steam condenser :

-the exchanger is tubular type and is cooled with water

-the cooling power is designed to fit with the maximal steam flow generated by the boiler (about 130KW)

-it is equipped with temperature sensors on the different circuits

-it is equipped with a water flowmeter

-it includes a vacuum breaker to avoid degradation when the steam condensates

-condensates go to steam traps

Steam traps :

-the line includes five steam traps

-each steam trap consists in a different technologie (thermodynamic, inverted bucket, bimetallic, ball float and balanced pressure)

-each steam trap is equipped with a sight glass and stop valve

-condensates go back to the water tank

Water cooling circuit :

-Cooling unit outside

-the cooling circuit includes a centrifugal pump

-Cooling unit :

-Average power : 140KW

-local electric cabinet with emergency stop

-fans are controlled by a temperature switch

-the structure is corrosion resistant

-fans are protected

-stop valves on the outlet and inlet

-drain valve

Others characteristics :

-the equipment include a pump (operated by steam) for condensate return

-the equipment also include a blowdown tank.

-the equipment will be fitted to laboratory

length :      6 m

width :       5 m

height :       2,3 m

weight :          3,2 t