Teaching equipment : Air Conditioning Unit

Air Conditioning Unit

DESCRIPTION   The air conditioning unit is delivered complete with instrumentation and with technical and instruction manuals. The basic operation is the same as in higher capacity units. Treatment zone in depression. Mixing chamber at the induction. It is possible to measure what enters, what happens and what leaves. Transparent treatment case.

Easy access to the elements. Use of the refrigerant R134a as required by new standards.

1. Mixing chamber
New air with simulation resistances of entry temperature 2550 W
Recycled air
Manual control
Protecting element

2. Filtration
Gravimetric solid filter
Opacimeter thin filter

3. Refrigeration R134a
Fluid R134a
Evaporator installed in the caisson – power 2kw
Condenser on the underframe bottom
Compressor , liquid tank, dehydrator, shock proof liquid bottle
Box of the condenser recovery

4. Dry steam humidifier
Power : 2kw
Vapour ramp

5. Electrical battery
Gel proof function
Preheating function
Heating function 1500 W

6. Fun
Nominal flow rate : 500 m3/h
Nominal speed : 1450 tr/min.
Variable speed
Output valve

7. Instrumentation
1 thermohygrometer with mobile probe
1 velometer
1 8-columned manometer for the static pressure measurement on the vein
1 refrigeration fluid flowmeter
1 High pressure manometer
1 low pressure manometer
1 highpressure controller
1 low pressure controller
1 combined pressure controller
1 pump down regulation thermostat

8. Aluminium underframe
Transparent and detachable lateral panels
Superior and inferiorpanels
Opening area of a valve 400 x 300