TECHNICAL SPECIFICATIONS
Power station PECOMARK
Winnow service
Atmospheric condenser
Tank of liquid
Isolating valve
Dehydrator
Liquid indicator
Flowmeter for evaporator with 0°C
Flowmeter for evaporator with +4°C
Flowmeter for evaporator with +8°C
Electromagnetic valve
Thermostatic pressure reducer with
external equalization of pressure
Evaporator double flow with 0°C
Evaporator double flow with +4°C
Evaporator double flow with +8°C
placed in environment
Manometer
Winnow with constant pressure
Non-return valve
Composition of the PECOMARK power station:
- 3 compressors 2 KC 05 2Y BITZER.
- Resistances of casing.
- Collector of aspiration stainless.
- Filters of aspiration US48.
- Valve of aspiration.
- Pressure gauge HP/BP diam 100mm.
- 1 pressure controller HP/BP by compressor (safety) |
- 1 general pressure controller HP safety
with the DEVELOPING COUNTRIES standards.
- 1 sensor 4/20mA BP.
- 1 sensor 4/20mA HP.
- 3 pressure controllers BP (regulation)
- 3 pressure controllers HP (regulation)
- Oil Separator + Tank + Valve + filter + electromagnetic sluice gate NO.
- Regulator of oil with valves of insulation.
- Vertical tank 60 liters.
- Valve of safety.
- Case filters dehydrator with replaceable cartridge.
- Liquid indicator.
- Liquid valve departure.
- Alarms optical level.
Composition of the isothermal boxes:
- Blowing of a power of 2000 W.
- Polyurethane Wall injected thickness 80mm.
Each evaporator is controlled by a room thermostat.
General regulation of type “neutral zone”
Digital display panel with probe of contact.
Manometer placed at the characteristic places of the system.
The whole being assembled on aluminium anodic frame posed on four
multidirectional casters, this bench is conceived especially for a school
use.
Manufacture of the bench following the standard ISO 9001 version 2000. |
