TECHNICAL SPECIFICATIONS
- 1 portable and autonomous monitor allowing:
- graphic and numerical visualization of the levels of measured
vibrations
- the recording and the filing of the numerical and graphic
data (spectrum)
- the parameter setting of the operating modes of this apparatus
(filters, frequencies…)
- the transfer of the data on PC and exploitation of the data on software
for graphic and numerical analysis/function for insertion of the data on
report/ratio WORD format
- 1 accelerometer of a threaded end allowing a fast and sour
fixing of the accelerometer on the system to be controlled for a greater
reliability of control
- 1 accelerometer integrated into the monitor for measurement by
direct contact for direct fixing on point of measurement integrated to the
MBP 011 (or on other machines possibly)
- 1 optical tachometer
- 1 temperature sensor to contact |
Design features
- Resolution: selective to 6400 lines
- Frequencies of 2Hz with 10kHz
- Selective filters passes high from 2/10HZ, 1/5kHz and low passes
1/5/40kHz
- Evaluations: acceleration (0-6000m/s ²)/speed (0-9000m/s)/amplitude
(0-9000mm) and shock wave (specific measurement for the bearings)
- optical tachometer 60-60000 tr/min
- Communication RS232/provided cable
- Software/omnitrend
- posting LCD 64 * 128
- batteries + charger
- autonomy: approximately 25h
- case of arrangement
|
