TECHNICAL SPECIFICATIONS
Teaching applications/16 T.P.
• Distribution and energy conversion (pneumatic/hydraulic/electric)
• Functions and components commercial
• Operating modes of the actuators, pre actuator and sensors
• Modes of failure of the actuators, pre actuator and sensors
• Diagnoses of failures
• Optimizations of cycle/ various adjustments
• Replacements of wearing parts
• Changes of technologies
• Changes of series
• Mechanical engineering on SOLIDWORKS
• Kit defective parts
• 2 Contact electrical on loop of safety (HS)
• 1 Distributer (HS)
• 1 Distributer (escape interns)
• 1 Hydraulic actuating cylinder (escape interns)
• 1 Limiting device of pressure (HS)
• 1 Sensor of proximity (HS)
• 1 Sensor with contact (HS)
• Kit spare parts
• 1 bandages of conveyer
• 2 ball bushes
• 3 guide bushes
• 1 capacitive sensor |
• 1 sensor with contact
• 1 inductive sensor
• 1 sensor
• Kit change of technology
• 1 lifting hydraulic actuating cylinder
• 1 lifting electric jack
• 1 hydraulic actuating cylinder grouping
• 1 jack grouping
• Kit subset
• 1 motor reducer for conveyer with pallets
• 1 power station
• 1 lifting hydraulic actuating cylinder
• 1 jack of pneumatic grouping
• Kit change of series
• 1 batch of guides
• 1 pallets limp of preserves 2:1 format
• 1 caster carriage
• Programming
• Software MAGELIS
• Software automat
ENVIRONMENT - DIMENSIONS
• Enclosure surrounded by a wire fence fixed on the ground at the time of
the installation
• Dimensions: L X L X H (mm): 4800 X 4500 X 2200 - Mass: 400 kg
|
