|
Description |
Reference |
Presentation |
Working
station:
- anodic aluminum structure
- 1 plate of work out of grating with vat of retention of
the drops
- 4 direct wheels with brake
- 1 rack for arrangement of the electric cords
- 1 rack for suspension of the hydraulic flexible devices
- 1 electric box (description below)
Box:
- piloting of the power (hydraulic central walk) by
commutatur with key
- food low tension (24Vdc – for distributers instruments
measuring, charts of regulation and automat)
- security management on module preventa (thermostat power
station, emergency stop and opening of the casings of the
operative parts)
- catch 230V for connection of a PC
- general four-pole disconnecting switch cadenassable
Length: approximately 1700 mm
Width: approximately 800 mm
Total height: approximately 1800 mm
|
UAH 010 SPE |
 |
Store of arrangement
For activity of identification and choice of the components
for constitution of a circuit or realization of a function
- anodic aluminum structure 1200 (L) * 1700 (H) on braked
wheels
- 8 meters linear of arrangement |
UAH 030 |
 |
Hydro-electric power station with 1 gear pump
- 1 mini tank 30L on casters
- 1 valve 1/4tr of setting to the cover
- 1 limiting device of pressure and pressure gauge
- 1 thermostatic probe with contact
- 1 engine 1.5kW 1500Tr/min
- 1 gear pump 4 Cm3 mini not immersed (apparent pipings) |
UAH 110 |
 |
|
Hydro-electric power station with 2 gear pump
- 1 tank 80L on casters
- 1 valve of setting to the cover
- 2 limitings device of pressure and 2 pressure gauges
- 1 thermostatic probe with contact
- 1 mini engine 3kW 1500tr/min
- 1 gear pump 4 Cm3
- 1 gear pump 14cm3 not immersed (apparent pipings)
|
UAH 120 |
 |
Hydro-electric power station with pistons with variable flow
- 1 mini tank 80L on casters
- 1 valve of setting to the cover
- 1 limiting device of pressure and pressure gauge
- 1 thermostatic probe with contact
- 1 mini engine 3kW 1500tr/min
- 1 piston pump with variable flow LS 18cm3 not immersed
(apparent pipings) with regulator flow/pressure |
UAH 130 |
 |
Set of 20
electric cables equipped with cards standard “banana”
doubles puit Æ 4mm
- 4 cables 500 (2 blue or black + 2 red)
- 10 cables 750mm (5 blue or black + 5 reds)
- 4 cables 1000mm (2 blue or black + 2 reds)
- 2 cables 1000mm (1 blue or black + 1 red)
Set of 25 flexible devices with couplers females
- 5 flexible devices 700mm
- 15 flexible devices 1000mm
- 5 flexible devices 1500mm |
UAH 210
UAH 220 |
|
|
Modulate direct order with 2 LP
- 1 contact NO
- 1 contact NC
by LP
|
UAH 310 |
 |
| Modulate
direct order with switch |
UAH 320 |
 |
Modulate
order simple relay
- multichannel relays dry NO +NC
- casings doubles well
- Simple Function relayage or sequential function |
UAH 340 |
 |
|
Modulate chart amplifier
Analogical chart
Adjustment of the parameters by potentiometers
For open loop control of all components proportional
|
UAH 360 |
|
|
Modulate numerical chart proportional pressure/flow
- 1 potentiometer
- 1 selector piloting potentiometer/chart
- chart with software of parameter setting and
acquisition/exploitation of the data in the form of curves
type SD13 22 Wandfluh
- function open loops/closed loops
- recopy of the analogical signal of the operative parts in
0/10V on casings doubles puit
- piloting by potentiometers and switches
- 2 voltmeters for tension of instruction and analogical
size measured on operative part
|
UAH 370 |
 |
|
Modulate numerical chart proportional position
- 1 potentiometer
- 1 selector piloting potentiometer/chart
- chart with software of parameter setting and
acquisition/exploitation of the data in the form of curves
type SD1342 Wandfluh
- function open loops/closed loops
- recopy of the analogical signal of the operative parts in
0/10V on casings doubles puit
piloting by potentiometers and switches
for control of position
- 2 voltmeters for tension of instruction and analogical
size measured on operative part
|
UAH 380 |
 |
|
Modulate anmeter |
UAH 390 |
|
|
 |
 |
 |
|
|
|
| Jack
raises load
- rigid metal structure
- Housings with protected door of access
- 10 masses of 5 kg
- specific housing
- 2 position encoders
in option:
for regulation of position in closed loop: a potentiometric
rule + bill-poster/conditioner compatible with chart UAH
380. |
UAH 1000 |
|
|
Mixer
- Rigid metal Structure
- Housings with protected door of access
- 1 hydraulic engine 60 turns/min; 400Nm couples
- 1 axis equipped with blades
- 1 tank 100L
- height of immersion of the blades in the adjustable tank
by standard elevator live/nut for variation of the resistive
torque
- 2 male couplers car sealing for food of the hydraulic
system
in option:
for regulation of flow in open loop or buckles closed: a
velocity pick-up + frequency meter compatible with chart UAH
370.(analogical exit 0 – 10 v) |
UAH 2000 |
 |
|
Rocking-lever
- Rigid metal Structure
- Housings with protected door of access
- 1 beam equipped with a support for positioning of the
masses
- 5 removable masses of 10 kg
- 1 jack of 500mm of race/diameter 40 minis
- 2 valves of balancing
- 2 sensors race end
- 2 male couplers car sealing
- 2 valves parachutes
in option:
for regulation of position in closed loop: a potentiometric
rule + bill-poster/conditioner compatible with chart UAH
380. |
UAH 3000 |
 |
| Press
- Rigid metal Structure
- Housings with protected door of access
- 1 jack of 100mm of race/diameter 40 minis
- 1 flap valve pilot-operated to avoid the movement of the
jack under the effect of its actual weight
- 1 cassette with spring for variation of the effort and the
position
in option:
for regulation of pressure in closed loop: an effort or
pressure pick-up + bill-poster/conditioner compatible with
chart UAH 370. |
UAH 4000 |
|
|
Together of fastening
- Rigid metal Structure
- Housings
- 2 jacks 50 mms in diameter 40mm with covers of fastening
allowing the implementation of the hydraulic sequences.
- 1 pressure controller for detection of fastening +
detecting inductive to visualize the re-entry of the 2
jacks.
- 4 sealing couplers car
- 1 metal part to attach
in option:
for regulation of pressure in closed loop: a pressure
pick-up + bill-poster/conditioner compatible with chart UAH
370.
|
UAH 5000 |
|
| Mixer
- 1 distributer 4/3 ABT
- 1 double volumetric governor
- 1 drilled block
- pressure taps
- male couplers car sealing
|
UAH 2100 |
|
|
Rocking-lever:
- distributer 4/3 ABT
- double flow control valve
- pressure taps
- male couplers car sealing
|
UAH 3100 |
|
|
Press:
- distributer 4/3 ABT
- pressure regulator
- double valve controlled non-return valve
- pressure taps
- male couplers car sealing
|
UAH 4100 |
|
| Mixer
- 1 distributer 4/3 ABT
- 1 volumetric governor proportional
- pressure taps
- male couplers car sealing
|
UAP 2200 |
|
|
Rocking-lever:
- distributer 4/3 ABT proportional
- double flow control valve
- pressure taps
- male couplers car sealing
|
UAP 3200 |
|
|
Press:
- distributer 4/3 ABT
- governor automatically-controlled proportional
- non-return valve doubles controlled
- pressure taps
- male couplers car sealing
|
UAP 4200 |
|
