TECHNICAL SPECIFICATIONS
Diversity of the material:
• Actuators : rotative, jacks with or without gear, diameter until 80mm,
courses until 200mm…
• Distributors: 5/2 and 3/2 on ASI bus
• Sensors ILS, PNP magnetic, opto-electric on ASI bus
• Securities: magnetic contact on case, electric and pneumatic cutters ,
safety electrovalve…
Improvement of the process:
• insertion of an automated supplying function of the parts
• modification of the supplying system by independent piloting of 2 jacks
• integration of an exhausting function of the parts detected as faulty
(distributor, sensor and jack)
• changing of the transferring system from circular to linear that allows
the improvement of the unit
• changing and addressing of an ASI modulus further to a system evolution
(see before) |
Activities of maintenance:
Important : all the suggested activities of maintenance are associated to
a real problematic that needs their operating (modification of the
operating material, configuration of the system of system’s functions for
e.g.)
Repairing:
• blocked jack
• blocked jack, replaced by a similar geometry jack but without
integrating magnetic detection: it needs the mechanic integration of
another type of sensors for insure an equivalent running
• sensor
• replacement of ASI cable
• distributor
|
