TECHNICAL SPECIFICATIONS
Diversity of the material:
• Actuators: rotative with padles, jack with or without gear, guided and
compact, depression suction pad, pliers…
• Distributors - bistable and monostables 5/2 and 5/3 – integrated near
the actuators
• Sensors ILS, PNP inductive or magnetic, capacitive, vacuum sensor with
incremental coder and sensor for detection of part profile
• Securities: contact with key on case, electric and pneumatic cutters,
security electrovalve…
Activities of maintenance:
Important : all the suggested maintenance activities are associated to a
real problematic that needs their operation (modification of the operation
material, of the configuration of the system of the functions of the
system for e.g.) |
Improvement of the system
• Adjustment of actuator’s courses
• addition of motions : integration of an additional action chain (sensor,
preactuator, jack) that allow the selection of parts with increased
dimensions
• Changing of technology of actuators: prehension through vacuum /
prehension through pliers : justified by an evolution of the geometry of
the parts to be handled
• Changing of technology of the sensors – inductive/capacitive, justified
by a modification of material on the parts you have to detect.
Diagnostic and repairing:
• Inductive sensor
|
