 |
|
 |
|
|
 |
Modular control and regulation unit
|
|
DESCRIPTION
This unit is designed to study various types of control loops
for water:
– Temperature
– Level
– Flow rate
– Pressure
Possible to study loops singly or in combination.
The student assembles the sensor(s) and actuator(s) in order to
create a regulation loop.
Possible to use 1,2,3 or 4 regulators according to the number of
control loops created.
Control of all regulators through software (possible to export
files through MATLAB type software).
|
The unit is
delivered with technical documentation, software, and a working
license.
This unit is designed for various levels of study.
|
|
TECHNICAL SPECIFICATIONS
The unit comes with 6 cases :
- 1 "actuator-case" : 2 diaphragms, 2 electric valves
- 1 "temperature sensor case" : 3 thermocouples (type t,c,k) , 1 pt 100
- 1 "flow rate sensor case" : 1 axial turbine, 1 venturi (with
differential pressure sensor)
- 1 " pressure sensor case" : 1 relative pressure, 1 absolute pressure, 1
differential pressure
- 1 " level sensor case " : 1 capacitive, 1 ultrasonic, 1 float
- 1 case of tubes including various lengths, knees, fixings, manual valves
The unit includes a thermoregulated group, and two plates for mounting the
elements of the loops.
Four regulators are mounted on the front wall with inlet and outlet
mounted on safety plugs. The supervision software provided can control
these regulators. |
|
PEDAGOGIC APPLICATIONS
- Study of various types of regulation loops
- Study of various types of sensors
- Study of various types of actuators
- Mechanical assembling and wiring
|
ENERGY
Air : Compressed - 6 bars (90 psi) maximum
Water : 10L/min – 3 bars (44 psi)
Electricity : 230 V single-phase |
|
|
