Teaching equipment : Pumping station

Our categories

Pumping station

DESCRIPTION

The system is composed of a chainage group in charge of feeding a pad tank from p tube well of a water gathering and 3 groups of recovery in charge of feeding the water chamber. (water tower) from the pad tank.

The output is about 2.5 m3/h, the pipework in transparent PVC.

This system simulates a real water supply network. It is managed by an industrial programmable controls and checking software.

Teaching equipment : Pumping station - SDP 100

TECHNICAL SPECIFICATIONS

• Hydraulic circuit
Polypropylene tanks, transparent PVC pipeline

• Engines
- Tube wells pump associated to a flow vectorial control variator – serf-priming
- Pad tank pump in charge of the aspiration

• Sensors
- analogue level on the capacitive type pad tank
- TOR level on the pad tank and relay conductive

type tank
- analogue output on the pad tank

• Automatism
- industrial programmable automation with a programmed keyboard
E/S TOR
E/S ANA for level sensors and output and frequency variator

- Control
PID for level and flow rate
TOR for level

• Checking
The unit can be connected to the checking system on a PC in order to collect working parameters and the alarm management

PEDAGOGIC APPLICATIONS

- Study of a pumping station concept
- Important parameters measurements on a station
- PID-TOR regulation
- Working cycle analysis
- Industrial type architecture
- API programming

UTILITIES
Electric feeding : 400 V TRI + NEUTRAL + LAND
Network water feeding : around 10 l/min – 4 bars maxi

DIMENSIONS
Length : 1800 mm
Width : 800 mm
Height : 2300 mm
Weight : 350 kg

Teaching equipment : Pumping station - schema SDP 100

Download this page in PDF :

Pumping station

Didatec Technologie - ZA du Parc 42490 Fraisses - France - Tel : 33 (0)4 77 10 10 10 - Fax : 33 (0)4 77 61 56 49
E-Mail : didatec.technologie@wanadoo.fr