TECHNICAL SPECIFICATIONS
1. Reagent Supply tanks
- High density polyethylene
- Volume 30 L
2. Supply pump for reagents
- Centrifugal and electromagnetic
- Flow rate : 0-600 min-1 at 4 mce
3. Constant flow rate tanks for the reagents
- 3.3 borosilicate glass - DN 50
4. Flow meters
- With stainless steel floater - 0-46L/h
- With 316 L stainless steel adjusting valve
5. Manifolds
- 316 L stainless steel
- Equipped with 4 1/4 turn- valves for the distribution of reagents into
each reactor
6. Reactor R1 : perfectly agitated
- 2 reactors in cascade – volume 0.5 L each
- 3.3 borosilicate glass
- each reactor is equipped with a variable-speed agitator 0-2000 rpm |
7. Reactor R2 : perfectly agitated
- Volume 1 L
- 3.3 borosilicate glass
- with variable-speed agitator 0 2000 rpm
8. Reactor R3 : high-dispersion plunger
- Column DN 50 // L=550 mm
- 3.3 borosilicate glass
- Padding : glass beads - Ø 3mm
- Padding support : PTFE
9. Reactor R4 : low-dispersion plunger
- Coil DN15 // L = 6000 mm
- 3.3 borosilicate glass
- with 4 purging connections and draining valves
10. Receiving tank
- High density polyethylene
- Volume 20 L
INSTRUMENTS
• 5 conductivity cells – 2 poles 0.1 µS/cm at 100 µS/cm
± 2% with
a Pt 1000 temperature probe :
0-100°C
± 0.5 °C
• Conductivity: electro luminescent display with simultaneous indication
of the temperature
The frame is an aluminum section, mounted on 4 little wheels with brakes |
