TECHNICAL CHARACTERISTICS
1. Rotative filter
- Construction: 316 L stainless steel
- Filtering section: 0.1 mē
- Tight drum consists of a ferrule and a lateral flange, that are carried
by a crossing shaft.
The ferrule is divided into two similar sections and is covered by
draining panels.
Pipelines for the filtrate extraction link each section to the supplier.
- Rotation speed of the drum: 0.33 at 3 rpm
- Motor efficiency of the drum: 0.18 kW
- A vat supports the drum-shaft bearing. It is equipped with an overflow
system, and an emptying pipeline
with valve
- An oscillating agitator (constists of a tandem zig-zag harrow) is
controlled by a moto-reducer
- Oscillation number: 27 / min
- Motor efficiency: 1/20 CV
- The discharge of the cake is made by air blowing: 1 m3/h ā 0.6 bar (9
psi)
- The supply is connected to the vat
2. Supply tank
- Capacity: 200 litres - 304 L stainless steel
- Cylinder/cone shaped
- Agitation system: moto-reducer of 0.37 kW -
speed: 0-600 rpm.
- Stainless steel emptying valve
3. Supply pump
- 316 L stainless steel
- Flow rate: 10-1000 L/h
- 0.37 kW motor
4. Extraction tank for the filtrate
- Capacity: 150 litres - 304 L-stainless steel
- Stitching for vacuum work, with manual valve for vacuum adjustment
(option: electro-pneumatic valve for the regulation)
- With pressure and level measurement
- Blowing stitching for the discharge of the cake
- Stainless steel emptying valve |
5. Extraction pump for the filtrate
- Pneumatic pump with diaphragm: 0-1200 L/h
- For charged, viscous or corrosive liquids
- Reduced maintenance, Easy starting
6. Vacuum pump
- With liquid rings (lost water: 4 L/min.)
- Aspired air flow rate: 45 m3/h
- Motor's efficiency: 1.5 kW
Instruments
- Electromagnetic flow meter: stainless steel body, 0 2000 L/h, 4-20 mA
outlet (for supervision) for the supply of the product to filter
- Capacitive level sensor with PTFE or stainless steel gear, L = 900 mm,
4-20 mA outlet (for supervision) for the extraction tank
- Piezzoresistive pressure sensor: -1 / 3 bar (5 psi), 4-20 mA outlet (for
monitoring) on the extraction tank
- Inductive sensor for the rotation speed
Control panel
ON/OFF and electric safety features
ON/OFF of filter drum, pumps, agitator, plate and control of the variation
of motors speed are possible (option for supervision)
Safety features
The unit is certified by concerned organisations and is designed to
conform with safety standards
CE Certification, ISO 9001Certification
Electric protection, differential breaker
Emergency stop
Pipeline
316 L stainless steel, ž turn valves (stainless steel body), PTFE seal
Frame: stainless steel |
