 |
|
 |
|
|
 |
Cutter 60 L
|
|
DESCRIPTION
Use for cutterer, to mix and emulsify
Use for the manufacture of: Meat and pork-butchery, fruits,
vegetables
Cut tank: approx. 60 liters
|
|
|
TECHNICAL SPECIFICATIONS
DESIGN
Temperature of work: 95 °C maximum. - Pressure of work: 0 bar maximum.
Parts in contact with the product: stainless steel 304 L
Interior and external surfaces microgrenaille ceramic
Frame of the machine stainless steel 304 L
PRINCIPAL ENGINE
Directly attached with the tank with the stainless steel engine cowling
Direct drive by the tree pick-boxes
Engine
Type 132 M-4/2-230 - 50 Hz = 1500/3000 rpm, 7.5/9 kw
For the difficult crushing of product
BRAKE DISCS
For principal engine
WORKING TOOLS FOR PRINCIPAL ENGINE
Stainless steel pick-boxes posed and fixed on the driving shaft
with 1 set of smooth knives and a set of knives saws
MOTOR REDUCER
with flask connected to the lid
with direct drive of the scraping arm
Type RF 27 DT 71 D 4 BM, 0.37 kw
Seals for motor reducer
WORKING TOOL FOR MOTOR REDUCER
Scraping stainless steel arm
REVERSE GEAR OF THE ARM MOTORIZES
By 3 seconds sequence
FERMENT
Capacity of the tank 60 liters
Load capacity From 8 to 40 liters maximum
Out of stainless steel 304 L, assembled on the principal engine
Basculable manually for draining of the product
LID
Out of stainless steel - with hinge fixes on the tank
closed lid
Tap of ventilation gone up on the lid
manual use
TEMPERATURE SENSOR
type Pt 100 placed in the lower part of the tank with
posting on the keyboard 2011
ELECTRIC COMPONENT
Tension of service: 400 V, 50 Hz, three-phase current - Tension of
order: 24 Vac
Power of connection From 7 to 11 kw/20 A with 25 A curves D
electrical power box out of stainless steel gone up on the frame of the
machine
Electric component thermal Protections of the various bodies of power
Order protection of the equipment of load
Control device by digital keyboard 2011 for manual operation of the
principal engine with digital posting
Timer, posting of the temperature of 0 with 100°C (with temperature
sensor), ordering of the vacuum pump (with device of vacuum).
Emergency stop. |
|
|
