TECHNICAL SPECIFICATIONS
1. Fermenter
Composed of 3 elements
- Higher stainless Lid 316 L
- 1 pricking of agitation
- 3 prickings in 3/8
- Standard Pressure gauge bumblebee – 1/+1,5 B
- Ring out of glass borosilicate
- Tank double stainless 316 L wraps 10l
- 4 standard prickings DNN 25
- 1 pricking of agitation DNN 80
- 2 prickings in 3/8 "
- 1 pricking in ¼ "
- 1 serpentín of cooling (also serves as against pale) out of stainless
316 L
2. Modulate agitation
- Reducing gear actuator of 0,37 kw
- Stirring velocity: 0-300 tr/min. with velocity pick-up
- Pale of liquid-gas mixture high performance
3. Vapor
- Temperature control: 1 Pt 100,
regulating PID and a pneumatic valve of regulation
- 1 pressure reducer, 1 valve of safety,
2 pressure gauges bumblebee type
and 1 filter
- System of cooling of the double
envelope and the serpentine
4. Gas injector
- Mass flowmeter valve with
punch of adjustment
- Paper element Filter sterilizable |
5. Gas crest gate
- Tubular Exchanger allowing to cool gases of fermentation
- Needle control Valve of adjustment
- Paper element Filter sterilizable
6. Break foam
- A mechanical action
7. Regulator of pH
- Vat of acid or basic
- A proportioning pump with exit RS 232
- A probe of pH
- A regulator PID
8. 4 controlled peristaltic pumps
9. Instrumentation (option)
- CO2 Probe with regulator and converter
- O2 Probe has with regulator and converter
- Pilot the mixer Gas-liquid
SUPERVISION
Analogical chart of acquisition (Eurotherm)
Analogical/numerical conversion chart
Connections with a PC via a port RS232C: cable reinforced ADF
Software of control of installation I-TOOLS (on/off, emergency stop and
piloting of the pumps, data and acquisition and temperature control
(temperatures, pressure in the column flows, rate of backward flow)
With synoptic with the screen
With computer Athlon 2600+, 256 m0 DDRAM, hard disk 80 GO 7200 tr/min.,
reader CDROM 52X, screen 17 ",
Laser printer black and white
|
