TECHNICAL SPECIFICATIONS
The pilot is especially designed like a material of laboratory.
It makes it possible to test the feasibility of a separation on the whole
of the industrial range of mineral and organic membranes, by optimizing
the samples.
General-purpose, it can be equipped with two modules, while ensuring the
simplicity of the connections for the passage of a module the other:
• RayflowO, plane micromodule for feasibility on organic membrane
• CarbosepO microphone, tubular micromodule for feasibility on mineral
• Membranes
INSTRUMENTATION
- 2 pressure pick-ups
- Precision %1± - scale 0-5 bars
- 1 stainless float Flowmeter: 0-750 L/H
- Variator of frequency for the pump allowing to control the flow
- Pt 100 classifies A 3 wire with digital bill-poster
- With data acquisition
ELECTRICAL EQUIPMENT BOX
- On/off Buttons; of the pump
- With all the elements necessary to the correct operation and the safety
of the equipment: fuses, thermics…
- Master switch with indicator low tension
- Stop blow of fist, differential 30 my
Piping: Stainless 316 L
SPECIFICATIONS
Cut fluid: between 2nm and 0,1 µm for the UF
Between 20 µm and 0,1 µm for MF |
1- Positive-displacement pump
- Pmaxi = 4 bar
- Flow: 0,1 - >3 m3/H
- With variable speed transmission
- P = 0,75 kw
2- Modulate ultrafiltration
3- Filter for the water of the network by the exchanger
- QV1 = recycled
- QV2 = re circulation – valves
- V1 = draining vat of food
- V2 = food pumps
- V3 = adjustment of recycled
- V4 = low on not recycled
- V5 = adjustment of the re circulation
- V6 = valve 3 ways insulation membrane
- V7/V8 = adjustment flow perméat
- V9 = supply water vat of food
- V10 = water supply of the exchanger
- P1 = pressure aspiration
- P2 = entered pressure membrane
- P3 = pressure left membrane (recycled side)
4 - Group thermoregulator
- Power 2 kw
- Team of a centrifuges pump 0-600 L/H with
float flowmeter
- With regulator PID
Modules and membranes
Modules
Tubular module CARBOSEPŇ 40
1 tubular module stainless monocanal 316 L, being able to be equipped with
membranes CARBOSEPŇ 40 cm or KERASEP™ 40, joined EPDM, without membrane.
Surface membrane available: 80 cm2
Ceramic membranes carbons
Membranes CARBOSEPO 40 mono canal proposed are available in the following
thresholds of cut:
Membranes CARBOSEPO 40 |
