Teaching equipment : Small Cutter 8

 

Our categories

Small Cutter 8

DESCRIPTION

 

Multipurpose machines GPA CT0 are used for cutterer, to mix, knead, emulsify.

GPA CT0 is perfectly adapted to the need for allbranches.

It finds its employment everywhere where it is necessary to carry out perfect finished products, of a constant quality.

It allows savings of time, of low maintenance costs, a vacuum work, a work at the temperature wished thanks to the double wall…

GPA CT0 improves conservation of the products. the suitable use of the under-vacuumduring manufacture brings to the product finished a delicate flux, one better distribution and connection of the flavors.
 

Teaching equipment : Small Cutter 8 - GPA TC0

 

GPA CT0 carries out multiplesfunctions and is of a simple handling.

 

Moreover, by eliminating the air,the microbiological activity reduced is even stopped, which allows a conservation prolonged of product.

Times of manufacture more rapids, multiple uses and easy use of small cutter rationalize the processes of work and lead to a better profitability.

Description of the machine

SMALL CUTTER
• To chop, mix, emulsify, crush and knead
• Capacity of the tank: 12 liters - load capacity: 8 L maximum.

DESIGN
• Temperature of work: 95 °C maximum. - Pressure of work: 0 bar maximum.
• Parts in contact with the product: Stainless steel
• Interior and external surfaces microgrenaille ceramic
• Synthetic matter frame, gray-white, RAL 9002

PRINCIPAL ENGINE
• Gone up in the frame of the machine
• Direct drive by the tree pick-boxes
• Driving flask with bayonet lock
• 50 Hz = Variable speed transmission of 150/2800 rpm, 1.8 kw
• Seals for principal engine

DRIVING BRAKE
• For principal engine, assembled in a plastic separate cupboard

WORKING TOOLS
• Stainless steel pick-boxes posed on the driving shaft
• with a set of broad smooth knives and a set of notched knives
• Mixing polyamide arm for manual use

FERMENT
• Out of stainless steel, assembled on the principal engine
• Dismountable manually for draining of the product

LID
• Out of transparent polycarbonate with hinge fixes on the tank

ELECTRIC COMPONENT
• Tension of service: 400 V, 50 Hz, three-phase current - Tension of order: 24 V
• Power of connection: 2 kw/16 A curve D
• Order protection of the equipment of load
• Control device by digital keyboard 2010 for manual operation of the principal engine in first or the

second speed
• Emergency stop

DESIGN FEATURES
• Three-phase current
• Capacity of the tank 12 L
• Engine output 1,8 KW
• Number of revolutions 150/2800 rpm
• Total height 600 mm
• Length 550 mm
• Width 340 mm
• Weight 34 kg

 


 

Download this page in PDF :

Small Cutter 8



Didatec Technologie - ZA du Parc 42490 Fraisses -  France -   Tel : 33 (0)4 77 10 10 10 -  Fax : 33 (0)4 77 61 56 49   
E-Mail : didatec.technologie@wanadoo.fr