TECHNICAL SPECIFICATIONS
1- Helicoidal rotor pump
- Pmaxi = 3 bar – stainless steel
- With speed variator
- P = 0,55 kW
- Flowrate : 2m3/h
2- Centrifugal pump
- Pmaxi = 3 bar – stainless steel
- P = 0,37 kW
- Flow rate : 5 m3/h
3- Supplying tank
Made of P.E.H.D., Volume 20 l
Equipped with an electric shaker with variable speed.(0-1000 rpm.)
Equipped with a resistance made of 304l stainless steel - 3 kW
4- Ultrafiltration modulus : planned modulus with organic
diaphragm, S=200 cm² and
Microfiltration modulus : tubular modulus with mineral diaphragm,
S= 200 cm²
5- Filter for the network water through the exchanger
- QV1 = recycled
- QV2 = recirculation – valves
- V1 = draining of the supplying tank
- V2 = pump supply
- V3 = adjustment of the recycled
- V4 = low point upon recycled |
- V5 = Adjustment of the recirculation
- V6 = 3-ways valve for the insulation of the diaphragm
- V7/V8 = adjustment of the flow rate of the
"perméat"
- V9 = Water supply for the tank
- V10 = water supply for the exchanger
- P1 = pressure at aspiration
- P2 = pressure at the diaphragm inlet
- P3 = pressure at the diaphragm outlet (recycled side)
5- Pipes : 316 l-stainless steel, PVC (foods quality)
INSTRUMENTS
▪ 3 pressure sensors
Accuracy
±
1% - range 0-5 bars
▪ 3 stainless steel rotameters:
o 40-400 l/h for the alimentation
o 0-4000 l/h for the filtration loop
o 0-250 l/h for the "retained"
o 0-250 l/h for the "filtered"
▪ Frequency variator for the pump allowing the regulation of the flow rate
▪ 1 Pt 100 with display
ARMOIRE ELECTRIQUE
- OFF/ON switch for the pump
- With all the need elements for a good working and the safety of the
equipment : cut out…
- Main switch with a low-tension indicator
- Emergency switch, differential circuit breaker mA |
