Teaching equipment : Car engine test bench

 

Our categories

Car engine test bench

DESCRIPTION

 

The car engine test bench is delivered complete with instrumentation and includes one experiment and technical manual.

Designed and manufactured to industrial standards.

This test bench has been designed to be safe, simple, effective, and easy to operate.

The modular design allows for the adaptation of various types of car engines.

 

Teaching equipment : Car engine test bench - TMT 01

TECHNICAL SPECIFICATIONS

Here after some examples of units:
 


Engine Peugeot 406 multipoint injection

The engine is equipped with a failures box in order to simulate an engine defect.
The radiator is mounted on rails making it easy to gain access to the engine.
 


Retention tank of the battery and the tank

The battery (1) and the fuel tank (2) are mounted on sliding rails, making it easy to access them.
The fuel tank slides out for easy filling. A lock on the cap prevents unauthorized opening of the tank by students.
 


Engine Citroen AX injection

On this example, the exhaust is vertical and protected by a perforated sheet.
 


Engine Laguna 2.0 L

The alternator belt is covered by a shield for safety.
Graphic diagrams advise against prospective risks (battery, expansion tank, belt…)

SPECIFICATIONS

• Frame :
Aluminum section mounted on wheels equipped

with brakes
Engine installed on silent blocks
Protective casing on the revolving parts subjected

to high temperatures
Retention tank for oil, water, fuel…
Vat for the battery, vat for the fuel tank


• Car type engine. A number of variations are possible (low, medium and high power, controlled or diesel ignition)


• The standard control and monitoring console consists of :

A circuit breaker
Starting button with key
Throttle with lever (or original pedal for the

motorized clappers)
Emergency stop
Charge warning light of the alternator
Oil pressure defect warning light
Water temperature defect warning
Rotating velocity indicator
Water temperature indicator
Oil pressure gauge
Fuse box


• Related systems
Electrical circuit : battery, alternator, starter, coils, computer, pumps, engines,…
Cooling circuit : radiator protected by a casing, fans, expansion tank…


• Safety devices
The equipment is in conformity with the European directives and industrial legislation


• Optional extras
The following systems can be added on the test bench:
The heating circuit of the passenger compartment
The air-conditioning circuit of the passenger compartment
Programming of the ignition system
Failures box

PEDAGOGIC APPLICATIONS

 

- Basic experiments involving the engine :
Draining and replacing oil (lubricating system) and water (cooling system).
Control sealing of the cylinders, oil and coolant circuits.
Control of temperatures and pressures
Removal and replacement of worn parts such as : belts, joints, plugs…
Control of the ignition and injection systems and the adjustment of valves

- It is possible to entirely remove the engine
Locating problems using functional analysis.(replacing worn parts,

making adjustments)

Simulation of failures on starting and charging (optional) circuits.

 

Teaching equipment : Car engine test bench - schema TMT 01

UTILITIES
The automotive engine test bench operates independently of external utilities.

DIMENSIONS
Length : 1 300 mm
Height : 1 200 mm
Height : 2 040 mm
Weight : (according to the engine)

 

Download this page in PDF :

Car engine test bench



Didatec Technologie - ZA du Parc 42490 Fraisses -  France -   Tel : 33 (0)4 77 10 10 10 -  Fax : 33 (0)4 77 61 56 49   
E-Mail : didatec.technologie@wanadoo.fr