Welcome To Didatec
Choose your product :

Teaching suggested applications*

-          Identification and study of sensors, regulator, actuator, disturbing element on the installation and on a synoptic diagram

-          Study of a temperature regulation loop

-          PID or auto adaptive parameters

-          Controller configuration by computer interface

-          Visualization of signals on supervision software

-          Characteristic curves (setpoint, measurement, etc.)

Description

The trainer is mounted on a frame and incorporates a PID type controller (Eurotherm 2216) wired and preconfigured so as to allow the regulation of the physical quantity considered (temperature).

This controller allows the measurement visualization (display) and its retransmission to a computer system.

It can operate either in automatic mode (autonomous regulation) or in manual mode with transmission of the command from a computer system to the actuator.

The link between the regulator and the computer system is WIFI.

The bench allows the study of air temperature regulation. For this, it is made up, at a minimum, of a heating body (oven), a heating resistance and a fan. The temperature is measured inside the oven and it will be regulated by a PID type regulator.

1- Regulation furnace

Stainless steel tube diameter 100mm

2- Electric heating resistance

Finned resistance

Power 250W

3- Fan

Axial type fan

Adjustable speed

• Electrical supply : 230 Vac – 50 Hz – 10 A
• Electrical network : 1 phase(s) + Neutral + Earth.
• Dimensions:  (LxWxH mm): 600 x 350 x 550
• weight (Kg): 20