BEC 010 - Condensation study unit
The BEC 010 allows the study of condensation. It consists of a main tank containing water. This water is heated and transformed into vapor.
The vapor will surround two condensers of different material (a copper condenser and a second with a gold coating) and to transform in liquid again.
Each condenser is designed to produce a different type of condensation: film and droplets.
The installation is very instrumented and can measure all the operating parameters (temperature, flow rate, pressure) to derive the heat exchanges according to several configurations. It is also equipped of a data monitoring with Didatec interface included.
The robust design of this equipment makes it perfectly suited for use in schools.
Its anodized aluminum frame with legs gives it great robustness as well as a great flexibility of integration into your premises. The manufacturing of this equipment meets the European machine directive.
Need more information?
Contact us- Visualization of the condensation in drops on the gold condenser and into a film on the copper condenser
- Study of heat transfer
- Study of the relation temperature / pressure for the water at saturation
- Measurement of the effect of increasing the rate of flow of cooling fluid on the heat transfer coefficient.
The bench is installed on an aluminum profile structure equipped with four directional braked casters.
It has an electrical box with a main power disconnect switch and a 30mA differential circuit breaker.
- Glass test cylinder V = 1.7 L
- Heating resistors P = 900 W with low level detection sensor (safety)
- adjustment of the heating power of the resistors by potentiometer
- water flow meters with needle adjustment valve for the flow to the exchangers
Scales: 0.2 to 1.5 L / min (gold); 0.3 to 3.0 L / min (copper)
- Two condensers
Material of 1st copper condenser: film
Material of 2nd gold-plated condenser: Drops
- Liquid / vapor separator
- vapor cooling coil (ambient air)
- Digital pressure sensor with display on the touch screen
- Test cylinder safety valve and safety pressure switch
- Electric vacuum pump
- Empty break valve
Integrated instrumentation:
- pressure sensor: -1 to 10bars
- water flowmeter (gold): 0.2 to 1.5 L / min
- water flowmeter (copper): 0.3 to 3.0 L / min
- t thermocouple temperature probes (X7): -20 to + 100 ° C
- Pt100 temperature probes (X4): -20 to + 100 ° C
- wattmeter heating resistance power: 0 to 1150W
The temperature and power measurements are displayed on a 7 "touch screen:
- Electrical supply: 230 VAC – 50 Hz – 20 A
- Electrical supply Type: 1-Phase + Neutral + Earth.
- Water supply network: 3 L/min – 3 bars
- Evacuation of water: on the floor
- Dimensions: (LxWxH mm): 1000 x 650 x 700
- weight (Kg): 55