GPC D15 - Continuous distillation unit
The GPCD15 bench allows the study of continuous distillation.
The mixture to be separated will be composed of ethanol and water. The mixture is transferred to the boiler, which consists of 4 heating resistors. The resistors will allow to bring the mixture to a boil, therefore, to evaporate and recover ethanol which has the lowest boiling temperature.
The robust design of this device makes it suitable for use in schools.
The equipment is set up on an Anodized aluminium frame on casters wheels. This gives it great strength and a flexibility of integration into your premises. The manufacture of this equipment complies with the European standard for machinery manufacturing.
Need more information?
Contact us- Study of the process
- Thermal and materials balance
- Determination of the number of theoretical plates by McCabe and Thiele construction
- Effectiveness of the column
- Supply tank
– Material: polyethylene
– Volume: 10 L
– Drain valve - Supply dosing pump
– Qmax= 12 L/h
– Pmax = 2 bar - Boiler
– Material: borosilicate glass
– DN 100 mm
– Length: 300 mm
– Volume: 2 L
– Heating cartridges P = 1.2 kW
– Temperature probe Pt 100
– Drain valve
– Level sensor for cutting heat - Distillation column
– Material: borosilicate glass
– DN 50 mm
– Length: 500 mm
– Filling: Raschig rings glass - Manual reflux head
– DN 50 mm
– Length: 150 mm
– Temperature probe Pt 100
– Manual needle valve - Condenser
– Material: borosilicate glass
– DN 50 mm
– Length: 300 mm
– Cooling coil in stainless steel: S = 0.05 m²
– Temperature probes Pt 100 at the inlet and outlet of the cooling coil - Distillate cooling exchanger
– Material: borosilicate glass
– Double wrapped mono tube exchanger - Receiver
– Material: polyethylene
– Volume 5 L
– Drain valve
- Electrical supply: 230 Vac – 50 Hz – 16 A
- Electrical network: 1 phase + Neutral + Earth
- Water supply: 15 L/min – 2 bars
- Water drain: on the floor
- Dimensions: (LxWxH mm): 1650 x 700 x 1800
- weight (Kg): 110