IPT 050 - Training unit for various technologies
The bench IPT 050 is a compact bench for technological education of
- Electrotechnics (studies of the control and the power)
- The pneumatic (study of the control circuits, valves, actuators, and sensors)
- Regulation (study of temperature control on/off and PID)
- Automation (study of grafcets, of programming, with a direct implementation of an operative part
It integrates on its 4 sides, a total of 4 independent workstations allowing to simultaneously conduct 4 practical work
The sides control, pneumatic and electrotechnics, allow a wide variety of wiring by the students, allowing them to compare different similar technologies, and to understand the limitations but also their interest.
The automation station equipped with removable breadboards allows to work on a wide variety of automation technologies (PLC brands, automation technologies …). You can also if you wish, to design your own automation breadboards.
The compact and mobile chassis makes the IPT 050 movable and easily transportable.
Need more information?
Contact us- Automation: grafcets study
- Automation: Analysis of wiring diagrams.
- Automation: programming (wired logic PLCs …)
- Temperature control: Study and parameter setting of control on/off
- Temperature control: Study and PID control parameters.
- Pneumatic: Study of pneumatic components technologies and chains of actions
- Pneumatic: technological choice of the components and mapping according to the functions to be performed and the defined context
- Electrotechnics: Study of asynchronous motor control circuits.
- Electrotechnics: Study of frequency inverters parameter settings.
- Electrotechnics: Study of the motors connections
- Anodized aluminum structure equipped with 4 braked swivel castors
- 4 working surfaces each integrating a specific and autonomous workstation, and a control panel dedicated
- Electrical cabinet of distribution of electric power on the 4 posts as well as the integration of automation breadboards
- Operative part conveying and drilling simulation consists of 1 conveyor drive by asynchronous geared motor worm gear and wheel, 2 cylinders for regulating the circulation of products to the workstation, and a drilling simulation cylinder
- Liftable hood to reach the interior of the operative part – Secured by magnetic sensor coupled to a safety relay cutting off the power distribution over the whole of the operative part
- PLC breadboard crouzet millenium 3 having 16 inputs / 10 outputs with connection plug
- Storage for unused automation breadboards (on lateral side of the bench)
- Other breadboards on request
- Power supply 400V 4-pole + 24Vdc, motor circuit breaker magnetothermic, switch of 1 direction with auxiliary contacts of self-maintaining and soft starter
- Reversing contactor with auxiliary contact NO and NC allowing the wiring in the rules of the control circuits with functions of self-holding and prohibition of drive direction inversion
- Single-phase inverter, three-phase inverter, dissipation resistance
- Three-phase asynchronous motor with flywheel disk and visualization disk. Speed sensor on periphery of the disk. Winding on double sink socket to allow the coupling star / triangle
Control panel consisting of the motor controls on dry contact switches and buttons, a speed display, 2 speed adjustment potentiometers for each of the inverters
- Electricity supply : 400 Vac – 50 Hz – 16 A
- Electrical network : 3 phase + Neutral + Earth.
- Compressed air supply : 5-6 bars (dry air)
- Dimensions: (LxlxH mm): 1680 x 800 x 1800
- Weight (Kg): 200