MMH 102 - Maintenance of ribbon blender
Need more information?
Contact us- System of conduct
- Parameterization
- Automation
- Technology change (electric motorization -> hydraulic)
- Preventive maintenance: seals, guidance, lubrication, control …)
- Corrective maintenance: hydraulic distributor, cylinder detector, contactor … (faulty equipment supplied)
- Integration of different hydraulic solutions of flow rate management (flow rate limiter / flow rate regulator / proportional regulator 2-way, proportional flow rate regulation 3-way) to improve the functioning of the system (variable speed) and comparison of their interest.
- Assembly / mechanical disassembly: bearings, of the motorization, of the tank flange, of the rotor, of the tank drainage mechanism …)
- Metallic chassis on braked swivel wheels
- Bearings – rolling bearings double row of swiveling balls – lip seals – tank sealing by cable gland – adjusting screw of the position of the bearing
- Rotor with steel blades – offset adjustable blades – position of adjustable axis by the bearings.
- 2.2 kW gear motor epicyclic reducer – 56TR / min approx. at the output (may be replaced by other geared motors and so that the hydraulic motor provided with the power station)
- Lower hatch of drainage guided by ball bearings and ball-bearing rollers- pneumatic cylinder- 2 ILS detectors – distributor 5/2
- Electrical box (see detail below) mounted on mobile structure also including the hydraulic power plant of the machine.
- Hydraulic ensemble (see diagram) consisting of: hydraulic plant with 55L tank, 2.2kW motor, geared pump 9L/min approx, pressure limiter, thermostat, a visual level, return filter with clogging indicator, manometer, pressure taps, 4/3 distributor, motor 160cm3 / rev
Box on mobile structure
- Console with pushbuttons, LEDs, and HMI color touch magelis 5.7 ”
- Twido PLC, circuit breakers, differential, motor circuit breakers, main contactor, 24vdc power …
- 3 interchangeable motor plates:
Provided: contact. inverter – soft starter Option: Variator
- Replacement material provided: 2 ball sleeves, 1 set of braids, 1 bearing seals kit, 2 ball bearings.
- Defaulting equipment provided (for diagnostic and corrective maintenance): 1 hydraulic distributor, 1 pneumatic cylinder, 1 contactor, 1 detector.
- Equipment for improvement activities: 1 limiter of hydraulic dual flow rate, 1 manual flow rate regulator, 1 proportional flow rate regulator 2 and 3 ways and 1 compact regulating board.
- 2 manometers and 1 flowmeter
- 2 material trays
- 1 oil barrel
- Electrical supply : 400Vac – 50 Hz
- Dimensions: (LxWxH mm): 1100 x 670 x 1800
- weight (Kg): 500