PCT 011 - Axial heat conduction study unit
The principle of PCT 011 bench is studying the radial conduction.
The axial conduction can be studied on different diameters and different materials such as brass and stainless steel.
The robust design of this equipment makes it perfectly suited for use in schools.
Its anodized aluminum frame with legs gives it great strength as well as great flexibility of integration into your premises. The manufacturing of this equipment meets the European machine directive
Need more information?
Contact us- Study of thermal exchanges by conduction.
- Study of the laws of linear and conduction.
- Determining the thermal conductivity of different materials.
- Study of the resistance of a contact surface and of the variation.
- List of temperature gradients according to different transfer levels.
- Study of the influence of the addition of a conductive paste between the samples and the heat source
- Temperature regulator
Allows to regulate the temperature of the resistor
- Ammeter
Allows to measure the current flowing through the resistor
- Voltmeter
Allows to measure the current flowing through the resistor
- Sample + support
Storage area of the samples used for axial conduction (D25mm stainless steel, brass D25 and brass D15 )
- Axial module – Heat source
Consisting of a brass cylinder D25 mm equipped with a heating cartridge
- Axial module – Cold source
Consisting of a brass cylinder D25 mm equipped with a circulating cold water
- Switch
Turning on the system
- Operation indicator of the resistor
- Push button
Allows you to read the power used by the resistor on the voltmeter and ammeter
- Multi-line temperature display
- Cooling system (network)
- Lever maintaining the axial modules
- An aluminum chassis profile with a study module of the linear conduction equipped with a thermal energy source provided by an electrical resistor and a connectable cooling circuit.
- An electrical console comprising: thermostat with a calibrated loop / measurement and display of temperatures, interface analog / digital all of the modules temperature probes. USB output to visualize in real time the heat transfer and temperature measurements on DIDATEC computer interface using a PC.
- Achievement of experiences in adiabatic conditions (isolation according to the outside)
- Study module of the linear conduction:
- Metallic cylinder Ø 25 mm heat emitter, isolated from the outside, equipped with three temperature probes distributed linearly.
- Metallic heat receiver cylinder, isolated from the outside, equipped with three temperature probes. This element is cooled by circulating cold water
- Brass demonstration cylinders Ø25, in stainless steel Ø25 and in brass Ø15, different metals are isolated from the outside. They are equipped with three temperature probes spaced linearly. The sample change occurs rapidly by simple action on a spring clamp lever. This module allows to study the influence of the nature of materials and the contact surface between the elements on the transmission of heat energy.
- Power supply: 230 V mono – 50 Hz – 16 A
- Water supply: 3 L/min – 3 bars
- Dimensions: (LxWxH mm): 700 x 700 x 600
- weight (Kg): 40