RCP 200 - Air pressure control study unit
The bench RCP 200 allows the study of the pressure control of air. The air comes from a compressed air system and is modulated by a control valve. Two successive tanks and a drain valve can create a disturbance. A digital PID controller is receiving pressure information and must adjust the opening of the control valve to achieve the setpoint.
The unit comes complete equipped with technical and pedagogical documentation in French as well as all the accessories required for proper operation (Included supervision software)
The robust design of this equipment makes it perfectly suited for use in schools.
Its anodized aluminum structure on wheels makes it extremely robust as well as great flexibility of integration into your premises. The manufacturing of this equipment meets the European machine directive
Need more information?
Contact us- Technical data on the elements of a control loop
- Study of a pressure control loop
- Identification of elements: Sensors, Regulator, Actuator, Disruptive element
- Configuring the controller by interface
- PID control parameters
- Visualization of different signals by software
- Characteristic curves
- Control On/Off
Two Pressurised tanks
Volume R1 : 0,85 L
Volume R2 : 1,9 L
Max Pressure: 4 bars operating pressure 3 bars Intermediate control valve
Overpressure valve
Manometer for direct pressure reading
Electronic pressure sensor
Measuring range : 0 to 6 bars
Control valve (Cv=0,1)
Equipped with a pneumatic actuator
Converter intensity-pressure
PID Microprocessor controller
Configuration in P, PI or PID
Accuracy class: 0.2
Configurable scale range
4-20 mA analog output
2 programmable relay outputs
On/Off control
Presence of a pressure switch and a solenoid valve
Disturbers elements
Discharge valve (HV01A)
Supervision software
Control and monitoring of the control process
Representation of relevant data on PC
Control and parameter setting of hardware controller
Recording and storage of developments in the time
Synoptic resuming the bench diagram
Sensor and actuator signals are brought back
on the sockets of the diagram
Two power supplies 24 VAC for two alarm LEDs
A status indicator light, sockets
- Electricity: 230 VAC mono – 50 Hz
- Compressed air (dry and oily) : 6 bars
- Dimensions: (LxWxH mm): 1000 x 700 x 700
- weight (Kg): 70