STC 700 - Instrumented universal test unit
The bench STC 700 is a bench destined to the test conduct of characterization of materials such as the tests of tensile, compression, bending, hardness, shear, or stamping up to 20kN
The load necessary to conduct of tests is performed manually.
The characteristics such as the Young modulus, the elastic limit of the materials and the limit of fracture can be studied. Retransmission of the force measures and displacement on acquisition card connectable to the USB port of a PC
- Force measure by sensor gauge bridge of capacity 20kN
- Deformation measurement by potentiometric sensor, 10mm stroke accurate to 0.01mm
- Display of force and deformation measurements on 2 screens integrated into the front panel
- Retransmission of the measures force and displacement on connectable acquisition card to the USB port of a PC
- Graphical operating software and data archiving {time, force, position relative elongation, constraints} / excel compatible data format (TXT …)
.
The bench is supplied in its basic version only equipped with tensile testing tool.
All other tools compatible with this bench are proposed in this technical sheet to enable an à la carte selection to suit your needs
The specimens for each type of test can be replenished at any time with the company DIDATEC (see at the end of data sheet).
However, to guarantee optimum replenishment cost, we provide in the technical file of the machine, the definition plans of these specimens. Thus, the institutions will have free choice of specimens embodiment (internally, through DIDATEC or sub-contractor of their choice)
Need more information?
Contact us- Tensile material characterization.
- Determination of the Young’s modulus of the material. .
- Characterization of hardness material Brinell
- Characterization of material in compression
- Characterization of material in bending
- Characterization of material in shearing
- Testing stamping, plastic deformation
1. Tensile test area2. Displacement sensor3. Compression test area, bending, shear and stamping following options selected4. Panel with On/Off button, moving display in mm, force display in Newton5. Acquisition card with integrated USB connector on the bench6. Steel gantry of adapted sections to the forces exerted7. Sensor force measurement8. Mechanical system of fast presetting of the spacing between the movable part and the tooling set depending on the type of specimen to be tested9. Hand crank for force application and displacement10. Anodized aluminum structure Set for tensile tests :Set of 8 specimens to screw M10x100mm (2 steel, 2 alu 2 copper, 2 brass)
- Electrical supply : 230 Vac – 50 Hz – 6 A
- Dimensions: (LxWxH mm): 550 x 370 x 1030
- weight (Kg): 85