BCD 350 - Fluid dynamics and study of pumps
The BCD350 bench allows the study of the pressure losses of the various piping components (elbows, fittings, valves and pipings).
A pump sucks water from a tank and sends it in a hydraulic circuit comprising all the components.
It is equipped with a measurement outlet differential pressure with quick connectors and a water column manometer with scale.
Users will need to vary the flow rate of water and measure the pressure losses of the components.
The bench is equipped with a precision flowmeter which allows to study the relation between flow rate and pressure drop for each element.
It also allows the study of centrifugal pumps of the same characteristics.
It is also equipped with two pumps, the latter can be studied alone, coupled in series or in parallel. Users will select different couplings and measure the following characteristics: flow rate, suction pressure, discharge pressure, rotational speed electrical power for different operating points. The robust design of this equipment makes it perfectly suited for school use.
Its anodized aluminum structure on wheels makes it very robust as well as a great flexibility of integration into your premises. The manufacturing of this equipment meets the European machine directive.
Need more information?
Contact us- Study of regular pressure losses
- Piping of different diameters (DN15, DN25)
- Piping smooth or rough of the same diameter (DN15)
- Study of singular pressure losses
- Elbows of different angles (180°, 135°, 45°)
- Short radius elbow (180°)
- Long Radius elbow (180°)
- Three different types of valves (diaphragm, bushel and needle)
- Sudden increase in diameter (DN15 – DN25)
- Sudden decrease in diameter (DN25 – DN15)
- Bernoulli’s Theorem
- Study of a venturi Plexiglas
- Study of a Plexiglas diaphragm
- Study of the characteristic curve of a centrifugal pump
- Study of a pump network in series or in parallel
- Influence of rotational speed
- Yield curve of a pump
Translucent PVC piping
Membrane flow rate control valve
Valve of circuit pressurization
Horizontal working plane
Piping of different diameters DN15, DN25 1 m
Piping smooth or rough of the same diameter (DN15) 1 m
Elbows of different angles (180°, 135°, 45°)
Three different types of valves (diaphragm, bushel, needle)
Sudden increase in diameter (DN15 – DN25)
Sudden decrease in diameter (DN25 – DN15)
Study of a venturi Plexiglas and plexiglas diaphragm
Water tank in polypropylene
Volume: 75 L
Multistage centrifugal pumps
Body, wheel and axle in stainless steel
8 m3/h, 0.75kW, 45 mCE
Variation in the speed by potentiometer
Set of valves allowing the study of a pump
alone, two pumps in series / parallel
Electromagnetic flowmeters
Scale : 5-300 L/min
Manometer at the circuit output
Scale : 0-4 bar
Four sensor pressure
Scale : – 1-10 bars
Pressure at suction and discharge of each pump
Differential pressure sensor
Scale : 0-4 bars, self sealing quick connectors in stainless steel
Measuring the rotational speed of the pumps
Numerical indicator of the rotational speed
Measuring the electrical power
Digital power indicator used by the operating pump(s)
Water column manometer
Scale up to 800 mm, self sealing quick connectors in stainless steel
- Power supply: 230 VAC – 50 Hz – 20 A
- Electrical supply Type: 1 phase + Neutral + Earth.
- Water supply: 15 L/min – 3 bar (tank of 75 L)
- Dimensions: (LxWxH mm): 2150 x 800 x 1850
- weight (Kg): 160