CRD 500 - Refrigeration cycle demonstration unit (water/water or air/water)
The CRD500 bench allows the study of refrigerating cycle.
The bench is made of standard elements of a refrigerating circuit. The compressor will first elevate the pressure and the gas temperature. The water condenser will then transform this high pressure gas in the high pressure liquid. Students visualize the transformation because the refrigerant condenses between the glass grille and the cooling coil.
The high-pressure liquid will then be stored in a bottle and then be sent to the expansion valve. This will change the state of the fluid, it will go from a high pressure liquid to a low pressure liquid. This low pressure liquid is now in the evaporator and will draw its energy to the water coil (and thus cooling it) or on the air following the selected evaporator. Students visualize the transformation (for water evaporator) because the refrigerant evaporates between the glass grille and the cooling coil. At the outlet of the evaporator, the fluid is in the form low pressure steam, it goes through a suction line accumulator and be compressed again by the compressor.
The robust design of this equipment makes it perfectly suited for use in schools.
Its anodized aluminum structure on feet gives it great robustness as well as great flexibility of integration into your premises. The manufacturing of this equipment meets the European machine directive
Need more information?
Contact us- Identify the components of a refrigeration installation with exchanger water/ water or air / water
- Commissioning and setting a heat pump installation
- Establish an energy balance on the various elements of the thermodynamic cycle (compressor, condenser, expansion valve and evaporator)
- Record the experimental points (temperature and pressure) of the thermodynamic cycle
- Determine the C.O.P. for different water flow rates
The bench is set up on an aluminum profile structure equipped with four directional castors with brakes.
It includes an electrical box with main power disconnector and 30mA GFCI.
- Hermetic reciprocating compressor around 400W
2. Low pressure gauge with double scale temperature / pressure
3. HP and BP safety pressure switch
4. Pressure gauge with double scale temperature / pressure
5. Safety valve set at 16 bar
6. Exchangers (X2):
-shell made of resistant glass (pressure and temperature)
-copper coil
-Volume of the exchanger: 1.19L
-Circulation of the fluid between the shell and the coil
-Neon back lighting (improves visualization)
7. liquid receiver with service valve volume 0.7L
8. Filter drier - sight glass
10. Fluid Flowmeter with Magnetic Transmission
11. expansion valve with internal pressure equalization
12. suction accumulator volume 0.3L
13. Cooling water tank with lid:
-material: white polyethylene
-volume: 75L
-draining valve at the bottom
14. Submersible pump, body, suction strainer and turbine made of stainless material
15. Water flow control valve
16. water flow meter (X2)
17. Operation mode solenoid (air / water or water / water)
18. Air Evaporator
Forced ventilation
400W power approx
19. Check valves
Integrated instrumentation:
-low pressure gauge (x2)
-High pressure gauge
-R134a flow meter
-water flow meter (X2)
-thermocouple temperature sensor T (X13): -20 to + 100 ° C
-compressor power meter : 0 to 1150W
The temperature and power measurements are displayed on a 7 "touchscreen:
- Power supply : 230Vac – 50 Hz – 4A
- Power supply type: 1 phase(s) + Neutral + Earth.
- Water capacity : 50 L
- Dimensions: (LxWxH mm): 1000 x 800 x 1510
- weight (Kg): 110